iRecord – using the website to enter a single record

iRecord

A single record is also known as a ‘Casual Record’

This is the way to enter a single record on the system. When you log in you will see a menu bar on the Home page. On the left side is Home, and to its right is Record. Click this to reveal the dropdown menu and click on Enter a casual record.

Record Destination:

The first box is Record Destination. You can ignore this unless you have signed up to an ‘Activity‘. (See our Introduction to Recording page on the website.) If you have signed up, you can choose it from the list that will appear if you click inside the box. It makes no difference which ‘group’ you choose as the destination of your records, they all get processed in the same way as far as verification and sharing with local and national datasets, so adding it to the Ad-hoc non-group records is fine.

Date:

Next select the date on which you found the plant by clicking on the calendar icon on the righthand side of the box and clicking on the date in the calendar on which you observed the plant.

Recorder Name:

The Recorder Name box should already display the name you entered when you created your iRecord account. If you were recording with others you can add additional names. To do this use semi-colons followed by Lastname, Firstname. e.g. “Hutchinson, Nevil; Eastwood, Ruth; Sturt, Nick”

Species:

You must then enter the name of the species, subspecies or hybrid. You can use the common name but we recommend trying to use the scientific name. If you use the common name please check that the scientific name which appears beneath it is correct. You can do this by looking it up in a field guide or use the internet. The reason for this is that occasionally the system attributes an inappropriate taxon to a common name. If this happens, please try again and scroll down until you find an entry with the appropriate scientific name, or having looked it up, enter the scientific name directly.

Note: when entering the species name you can type in the first three letters of the genus, a space, then start typing the specific name, and the system will provide a list of options to choose from. e.g. type “bel pe” and ‘Bellis perennis, Daisy, flowering plant’ will appear at the top of the list. Just click on it to enter it into the Species box. The same is true for common names.

Certainty:

This is usually set to Certain as a default, and it’s fine to leave it as that. The record will be reviewed and verified before it’s added to a database regardless of what is entered here.

Quantity:

This isn’t a necessary field, so can be left blank, but it is useful information so we encourage you to add details if you can. However there are specific terms that biological recorders use if they’re not putting in a number (which can be rounded to a sensible value, e.g. 100, 500). The commonest is the DAFOR scale, which stands for Dominant, Abundant, Frequent, Occasional, Rare. You can simply use the capital letter rather than type out the word.

Sex:

This is not necessary and is usually left as not recorded. However, for dioecous species it could be included.

Stage:

Again, most people leave this as the default value of not recorded, but the options are there if you choose to use them.

Identified by:

This should be left blank if you identified the plant yourself. If someone else identified it for you then add their name here: Surname, Firstname.

Photos:

You can add any photos here, either by copying and pasting the file name from your computer or by dragging the file into the box provided. Photos can be added for your own interest, or to allow the verifier to confirm the identity. This is important if the plant is difficult to identify or rare. For advice on how to photograph plants so that all the features that might be necessary to confirm identification can be seen, have a look at this page on the BSBI website.

Sensitivity

It’s difficult to know what constitutes a ‘sensitive’ record. Generally we advise against marking records as sensitive as it affects the way grid references are handled when the records are imported into other databases. However, certain groups of wild plants are sometimes the victims of people who wish to dig them up and keep them for themselves. The most obvious group are the rare orchids, such as Lady Orchids (Orchis purpurea) or Lizard Orchid (Himantoglossum hircinum). One solution to the problem is to allow the verifier to mark a record as Sensitive if they feel it’s necessary. After all, they will usually have the best understanding of a plant’s rarity and vulnerability.

Location:

This is a necessary field, as denoted by the red asterisk next to the field box. Use a name that appears on the Ordnance Survey map (or similar map). Don’t use something very specific such as a road name or description such as “five metres from the phonebox on the corner of High Street and Long Lane”. Precise location details can be added in the Comments section, the purpose being to allow others to re-locate the plant.

Enter a spatial reference:

This is the grid reference of where the plant is located. It uses the Ordnance Survey grid reference system. This consists of two letters followed by an even series of numbers. The more numbers, the more precise the size of the ‘box’ on the map. e.g. TQ31 is a hectad. This is a 10km x 10km square. Obviously this would not be great as an indication of where a plant is growing, and the minimum level of precision is the monad, or 1km x 1km square: TQ3618 for example. However, you should use the most accurate grid reference available to you, such as a 100m x 100m square (six-figure, e.g. TQ362189) or even 10m x 10m (eight figure, e.g. TQ36241897). Ten-figure grid references can be entered, a 1m x 1m square, but given that the accuracy of satellite-base Global Positioning Systems (GPS) is at best to within 3m for non-commercial users, at ten-figure grid reference will be necessarily inaccurate. Having said that, the system will accept them.

There are two ways to enter the grid reference: you can type it into the box if you know it already, or you can use the map on the righthand side of the screen to locate the position of the plant. When you click on the map over the area where you found it, a grid reference is automatically entered in the box and a square is highlighted on the map. As you zoom-in and click on the map the squares get smaller and the grid references are correspondingly more precise. Eventually the map switches to ‘satellite’ view which helps you to locate the area where the plant was found up to a maximum of 10m x 10m, or an eight-figure grid reference.

You can search for a place name on the Ordnance Survey map by typing it into the Or search for a place on the map box. This will display a small scale OS map with the place name visible. you can then zoom-in to create a more precise grid reference.

Habitat

It is not necessary to complete this section, although to do so simply requires you to click in the box to reveal the drop-down menu and click on the most appropriate description. Sometimes it’s not easy to decide, but so long as it’s not wildly wide of the mark (e.g. Coastal instead of Inland water) it’s fine.

If you do select a habitat type from the list you will notice a second box appear underneath. If you click in this box it will provide you with an additional list of more refined habitat types based on the once selected in the first box. This can sometime help you decide whether your main habitat category choice was correct.

Comment:

As mentioned above, this is where you can add free-text information about the record. This might include detailed instructions on how to refind the plant (especially important if it is rare); information about the provenance of the specimen, e.g. if a tree or shrub, was it planted or self-seeded, or it’s age/size, or if it is a garden plant, has it self-seeded and if so is it spreading, or is the parent plant nearby.

If the plant is rare in Sussex (for example, it might be on our Rare Plant Register), then the more information you can add, the better it will help us to understand how it is faring. Things like whether it is thriving or in danger of being smothered by surrounding vegetation, or which other species are growing with it.

Save

To submit your data you must click on the blue Save button at the bottom of the form. It will then confirm that your data has been uploaded, or it may flag an error for one of the fields. This is most commonly due to a grid reference that has been entered manually, which is why using the map to select the grid reference is a safer bet.

Occasionally you will get a network error message when the website is updating its software or carrying out work on the database. In this situation you will have to wait for them to finish the work and re-submit your record.